Washing machine or Dryer displays error E90, E91
Issue
Washing machine or Dyer displays error message E90, E91
Applies to
- Front Load Washer
- Front Load Washer Dryer
- Heat Pump Dryer
- Condenser Dryer
Solution
Internal failure, No communication between electronic elements of the appliance.
- Switch the appliance off and on again.
- Unplug the machine for a few minutes then plug it in and turn on
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Centre.
Was this article helpful?
Related Articles
- Front load washer, washer dryer, displays error E40, E41
- Washing machine does not take detergents / water remains in the softener compartment
- Washing machine emits a burning smell
- Washing machine emits noises and shakes while spinning
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front Load washing machine inlet hose is leaking
- Tumble dryer displays a padlock
- Clothes are still damp at the end of the drying cycle
- Tumble dryer does not start / does not work
- Dryer stops after a few minutes of the cycle
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.
Related Articles
- Front load washer, washer dryer, displays error E40, E41
- Washing machine does not take detergents / water remains in the softener compartment
- Washing machine emits a burning smell
- Washing machine emits noises and shakes while spinning
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front Load washing machine inlet hose is leaking
- Tumble dryer displays a padlock
- Clothes are still damp at the end of the drying cycle
- Tumble dryer does not start / does not work
- Dryer stops after a few minutes of the cycle