The Hob2Hood function does not work with the cooker hood

Issue

• The Hob2Hood function does not work with the cooker hood
• Cannot activate Hob2Hood function
• How does the Hob2Hood function work?

Applies to

• H2H Rangehood

Solution

1. Check whether the cooker hood and the hob are both equipped with the Hob2Hood function.

• For most of the hoods and Induction Cooktops, the remote system is originally activated.

2. Set the Hob2Hood function as described in the user manual.

• If the rangehood is not functioning on H2H - check that it is has been enabled.

3. If the function is enabled:

• Protect the hood panel from direct illumination by sunlight
• Do not direct the halogen light onto the hood panel
• Do not cover the control panel of the hob
• Do not block the signal between the hob and the hood panel (e.g. with your hand or the handle of a dish). See the example illustration:

4. Induction Cooktop - Check the hob to hood function is ON and check the H2H setting.

Refer to the cooktop user manual

Contact an Authorized Service Centre.

If the above steps don't resolve the issue, we recommend contacting an Authorized Service Centre.

Hob2Hood general information

• Hob2Hood is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator.
• The speed of the fan is defined automatically on the basis of the mode setting and temperature of the hottest cookware on the hob.
• The hob automatically sets the speed of the fan according to the cooking process.
• You can also operate the fan from the hob manually.
• The hood operates only when the hob is activated.