Error Code "Err" or 3 lines in the display - - -
Issue
Tumble dryer displays error message "Err" or " - - - ".
Applies to
- Heat Pump Dryers
- Condenser Dryers
- Front Load Washer
- Front Load Washer Dryer
Solution
Indicates a wrong selection with the selected program.
Make sure that the additional options selected are suitable for the program selected.
- Change a program
1. Press the on/off button to deactivate appliance
2. Press the on/off button to activate the appliance.
3. Set the program.
Refer to the options table in the user manual.
To find out more about your specific model download your user manual.
Was this article helpful?
Related Articles
- Washing machine does not start
- Excessive moisture, on walls and windows where the tumble dryer is located
- Tumble Dryer noisy drum / knocking noise during drum rotation
- Tumble dryer displays a padlock
- Control panel touch pad is not responding - Top Loader Washing Machine
- Care and cleaning the washing machine’s rubber door seal
- Washing machine does not take detergents / water remains in the softener compartment
- Tumble dryer is leaking
- The washing cycle is shorter / longer than indicated on the display
- Drying Rack – How to install and use drying rack program
Related Articles
- Washing machine does not start
- Excessive moisture, on walls and windows where the tumble dryer is located
- Tumble Dryer noisy drum / knocking noise during drum rotation
- Tumble dryer displays a padlock
- Control panel touch pad is not responding - Top Loader Washing Machine
- Care and cleaning the washing machine’s rubber door seal
- Washing machine does not take detergents / water remains in the softener compartment
- Tumble dryer is leaking
- The washing cycle is shorter / longer than indicated on the display
- Drying Rack – How to install and use drying rack program