Error Code E30- Top Loader Washing Machine
Issue
Error code E30 on control panel display
Applies to
- Top Load Washing Machine
Solution
Error Code E30 - Possible causes
Difficulties in draining for washing
- Drain system blocked up
Resolution
- Check the drain hose installation is correct and the drain hose is not kinked.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Centre.
Other possible causes
- Water inlet valve defective
- Pressure sensor defective
- Drain system blocked up
- Drain pump / Drain valve defective
- Wiring or main board defective
Was this article helpful?
Related Articles
- Soft Close Lid Troubleshooting - Top Load Washing Machine
- Can I wash shoes in the front load washing machine
- Washing machine does not spin
- Tumble dryer displays a padlock
- Drying Rack – How to install and use drying rack program
- The washing cycle is shorter / longer than indicated on the display
- Care and cleaning the washing machine’s rubber door seal
- No water is visible in the drum - Front Load Washer
- Error Code E5A -Tumble Dryer
- Tumble dryer shrinks clothes
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.
Related Articles
- Soft Close Lid Troubleshooting - Top Load Washing Machine
- Can I wash shoes in the front load washing machine
- Washing machine does not spin
- Tumble dryer displays a padlock
- Drying Rack – How to install and use drying rack program
- The washing cycle is shorter / longer than indicated on the display
- Care and cleaning the washing machine’s rubber door seal
- No water is visible in the drum - Front Load Washer
- Error Code E5A -Tumble Dryer
- Tumble dryer shrinks clothes