Dryer - the display shows different running times for the same programme
Issue
- The display of the dryer shows different running times for the same programme
- The actual programme duration differs from the one specified in the user manual
Applies to
- Heat Pump Dryers
- Condenser Dryers
Solution
1. The appliance is working correctly.
The drying duration is calculated according to various parameters, such as:
- ambient temperature
- initial laundry moisture
- load mass and type
The displayed time adjusts to the actual programme duration.
Was this article helpful?
Related Articles
- Washing machine does not spin
- Front load washer or washer dryer displays error E20, E21
- Heat Pump dryer not drying, not drying properly, too long drying
- Washing machine’s drain pump filter is jammed, cannot be removed
- Care and cleaning the washing machine’s rubber door seal
- Front load washer or washer dryer displays error E10, E11
- Washing machine does not start
- Excessive moisture, on walls and windows where the tumble dryer is located
- Tumble Dryer noisy drum / knocking noise during drum rotation
- Tumble dryer displays a padlock
Related Articles
- Washing machine does not spin
- Front load washer or washer dryer displays error E20, E21
- Heat Pump dryer not drying, not drying properly, too long drying
- Washing machine’s drain pump filter is jammed, cannot be removed
- Care and cleaning the washing machine’s rubber door seal
- Front load washer or washer dryer displays error E10, E11
- Washing machine does not start
- Excessive moisture, on walls and windows where the tumble dryer is located
- Tumble Dryer noisy drum / knocking noise during drum rotation
- Tumble dryer displays a padlock