Air Conditioner – Window Wall does not start

Issue

Air Conditioner – Window Wall does not start

Possible cause and troubleshooting

Applies to

• Air Conditioner - Window Wall

Solution

The air conditioner is unplugged.

Make sure the air conditioner plug is pushed completely into the outlet and switched on.

The fuse is blown/circuit breaker is tripped.

Check the house fuse/circuit breaker box and replace the fuse or reset the breaker.

Power failure.

If power failure occurs, switch off and disconnect/unplug the power cord. When power is restored, reconnect (plug in) the power cord, switch on the power and wait 3 minutes to restart the air conditioner to prevent tripping of the compressor overload.

If the problem still exists, disconnect the power and contact an Authorised Service Centre.