Water is flowing back into the dishwasher
Issue
- Water is flowing back into the dishwasher.
Applies to
- Dishwasher
Solution
1. Ensure that the drain hose has been installed correctly.
Make sure that:
- The length of the drain hose does not exceed 400 cm.
- The drain inlet point must be between 40 and 85 cm.
- The drain hose is not damaged, kinked or twisted.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Centre.
Was this article helpful?
Related Articles
- Internal light in the dishwasher is not working
- Dishwasher - Why should I use Rinse Aid?
- Water in brand new dishwasher
- Dishwasher does not switch on, no light on the control panel
- Dishwasher door does not close
- Dishwasher short-circuits, burns out fuses or trips RCD circuit breakers
- Too much foam in the dishwasher during or after finish of the cycle
- Program not starting and cycle indicator light flashing on dishwasher
- Dishwasher poor wash results? loading your dishwasher for best results - Video
- How To Install Dishwasher - Video
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.
Related Articles
- Internal light in the dishwasher is not working
- Dishwasher - Why should I use Rinse Aid?
- Water in brand new dishwasher
- Dishwasher does not switch on, no light on the control panel
- Dishwasher door does not close
- Dishwasher short-circuits, burns out fuses or trips RCD circuit breakers
- Too much foam in the dishwasher during or after finish of the cycle
- Program not starting and cycle indicator light flashing on dishwasher
- Dishwasher poor wash results? loading your dishwasher for best results - Video
- How To Install Dishwasher - Video