Dryer stops after a few minutes of the cycle

Issue

• Dryer stops after a few minutes of the cycle
• The appliance stops during operation.

Applies to

• Heat Pump Dryers
• Condenser Dryers
• Vented Dryer

Solution

Drying functions

Sensor Dry Cycles

• Automatic Drying programs
• Humidity sensors are activated throughout each cycle to eliminate over drying, which can be harmful to fabrics.

Time Dry

You can set the program duration, from a minimum of 10 minutes to a maximum of 2 hours. The required duration is related to the quantity of laundry in the appliance.

If you find your tumble dryer ending the cycle and switching off after a few minutes of during Automatic Drying program cycles, it might be useful to check the following.

• Load is too small for an automatic drying cycle, use the Time Dry program.
• If you are finishing off clothes in the dryer that have been dried on a clothesline or if the load is very small, use the Time Dry program.
• Make sure that the filter is clean. Check the fluff filter is clean and empty before the drying cycle.
• Check if the “water tank full” indicator is lit (if present). The appliance will stop the cycle if the water tank is full. Empty the tank and restart the cycle.

Contact an Authorized Service Centre.

If the above steps don't resolve the issue, we recommend contacting an Authorized Service Centre.